Removable end cap allows for an additional hose connector to be added to the base, enabling the operation of multiple sprinklers from just one tap.

Four discs of varying sizes are provided for use in areas of high water pressure to control smaller watering diameters and ensure a consistently even distribution of water. These can be easily inserted under the removable sprinkler top. Diameters may vary with different water pressures. From 2.5m to 6.5m.

The upright operating position can be adjusted for use on uneven surfaces, such as tiered gardens. Gently flex the side skids of the sprinkler base downward and rotate the centre turret to the desired position, then ensure the teeth are correctly engaged as you release the sled base.

Use for roof cooling on sheds and bird aviaries.

For a temporary application just run the hose over the roof peak and the sprinkler sits vertically on the corrugated iron.

For permanent installation run the sprinklers and hose across the corrugated iron securing the sprinkler through the holes provided using the existing roofing teck screws. Use 20mm metal pipe saddles to hold the hoses in place using the existing roof screws.