Philmac Universal Transition Coupling (UTC) by 3/4" Threaded Connection

Philmac Universal Transition Coupling (UTC) by 3/4" Threaded Connection
Share

Philmac Universal Transition Coupling (UTC) by 3/4" Threaded Connection

Manufacturer: Philmac

The UTC® universal transition fittings range are the Swiss Army Knife of fittings. No matter what pipe material or size encountered, this fitting ensures a fast and simple connection. Used on mains-to-meter connections and general applications worldwide, this fitting comes highly recommended to make pipe connection the priority, rather than having to locate or stock the 'right fitting' for every situation.

The UTC® connects most pipe materials between 15 - 61mm including galvanised iron, PE, steel, stainless steel, copper, ABS and PVC.

CLICK HERE FOR FULL PRODUCT DETAILS

Universal Design

Through its wide tolerance, the Philmac UTC® is designed to accommodate a range of different diameters on most pipe material (including PVC, copper, galvanized iron, ABS, lead, stainless steel, steel, polyethylene and PEX).

Large Seal

The large seal in Philmac UTC® is particularly suited to Out-of-Round and Pitted pipes Slide & Tighten™ technology: The Philmac UTC® incorporates all the benefits of Philmac’s Slide & Tighten™ technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can
then be tightened using a wrench. The UTC® is fully installed when the nut can no longer be tightened with reasonable force.

No special tools are required and the Philmac UTC® is supplied ready to use.

Easy Disassembly

The design of the UTC® means that once the nut is backed off, the pipe can easily be removed from the fitting

Dynamic Sealing Method

The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.

* Pipes at the top end of the fitting tolerance may incur minimum resistance.

No Loose Components

The Philmac UTC® is fully integrated with no loose components. There is no need for individual assembly of a split ring, sealing ring or nut. All that is required is the
insertion of the pipe and tightening of the nut.

Approvals

The Philmac UTC® holds a number of potable water approvals –

  • WRAS (UK) for above and below ground use;
  • WSAA and WaterMark (Australia);
  • ACS (France);
  • DTC (Denmark),
  • CSA (Canada) and
  • NSF (USA).

The fittings are also manufactured to the highest standards in accordance with the company’s ISO 9001:2000 Quality Endorsed status.

Dielectric (insulating) fitting

UTC® fittings are insulating and are a “Dielectric” fitting for use between dis-similar metals.

Made from advanced thermoplastic materials

The Philmac UTC® is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC® end contains hard stainless steel grippers which provide superior end load resistance.

Rated to 12.5 Bar (180psi)

The Philmac UTC® is pressure rated to 12.5 bar (180psi) at 23 °C (73 °F) to meet the needs of high pressure systems.

50 year + design life

Built to withstand the toughest conditions to ensure longevity and durability, Philmac UTC® has a 50 year+ design life at 23 °C (73 °F).